I've got a weird problem with pipes in 2014. When I edit a pipe (right-click Pipe Properties) and make a change, when I press OK or Apply, the pipe SIZE changes? It's still listed as a 300mm PVC, but it's being represented as a 410mm? Look at the attached image. The storm (green) shoes a 300mm pipe and 375. The 375 is smaller? THe pipe style (as you can see int he image, is set to displae the inside pipe walls.
Nothing is unique here about the pipe sizes, this is a stock pipe catalog.
But the size doesn't really change, only how the pipe is drawn in the profile. I've never seen something like this before. It measures .418m instead of .3m.
Solved! Go to Solution.
Is this reproducible with different pipes and in different drawings?
What specifically are you changing in the pipe properties?
Credit where credit is due! Give kudos or accept as solution whenever you can.
I was chanigng pipe slope - but the solution here seemed to be re-pathing the part catalog to our network location. The version we had it pointing to after installation was causing it to replace the part.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.