We have a storm sewer on a looped road approximately placed from sta 0+50 running down station to the end of the loop at sta 51+50.
When I draw he pipe in profile it runs from sta 0+50 to sta 51+50 (5000 LF) when it should run from sta 51+00 to 0+50 (100 LF). This should show the pipe in two profile view locations. One at the start from 0+00 to 0+50 and hen at the end from sta 51+00 to 51+50.
Anyway to get this thing to plot correctly short of some plines?
John Mayo
Solved! Go to Solution.
Solved by troma. Go to Solution.
Mark Green
Working on Civil 3D in Canada
Yeah that's what I was thinking for the limitation and solution. Since the sheets are all set and the plines are drawn I think it will stay as it is until someone needs to revise.
Where's that wishlist. 😞
John Mayo
I ended up using two alignments but I would be interested to hear how two profile views on one alignment works out.
Mark Green
Working on Civil 3D in Canada