AutoCAD Civil 3D General

Reply
Active Member
suribe
Posts: 6
Registered: ‎01-15-2014
Message 1 of 5 (226 Views)
Accepted Solution

Pipe Styles

226 Views, 4 Replies
01-15-2014 02:50 PM

I'm trying to display a pipe network with a certain pipe style, and in the same file display a profile of that pipe network with a different pipe style(crossing pipe style). When I change the plan pipe network, the profile pipe changes as well. I was wondering if one pipe can take on different pipe styles in the same file?

 

Thanks.

*Expert Elite*
Jeff_M
Posts: 4,178
Registered: ‎07-22-2003
Message 2 of 5 (222 Views)

Re: Pipe Styles

01-15-2014 03:06 PM in reply to: suribe

Yes, in the ProfileView properties, find the PipeNetwork tab, Here you can specify part style overrides for display in the profile.

Jeff_M, also a frequent Swamper
Active Member
suribe
Posts: 6
Registered: ‎01-15-2014
Message 3 of 5 (201 Views)

Re: Pipe Styles

01-15-2014 04:02 PM in reply to: Jeff_M

Ahh... Yes. That's what I was looking for. Thanks.

 

Let me ask you a question...

 

Is there a way to automatically set a pipe network so that when you draw it in profile, it automatically takes on a style, for instance if the pipe is a crossing then it will draw in the profile as a crossing style? Instead of going through the profile properties and manually overriding the styles.

 

Thanks.

*Expert Elite*
Jeff_M
Posts: 4,178
Registered: ‎07-22-2003
Message 4 of 5 (182 Views)

Re: Pipe Styles

01-15-2014 07:16 PM in reply to: suribe

No, there isn't. It would be nice if C3D recognizd that the crossing style would be needed, but it does not do so yet. 

 

If you find a response which answers your question, please be sure to accept the actual post which helped you as the solution. This will help future searchers quickly find answers to their own questions. Thanks!

Jeff_M, also a frequent Swamper
Active Member
suribe
Posts: 6
Registered: ‎01-15-2014
Message 5 of 5 (141 Views)

Re: Pipe Styles

01-17-2014 07:12 AM in reply to: Jeff_M

Thanks. It would be nice to have civil automatically know what type of pipe condition it needs to display on the profile.

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs