I can't believe I haven't encountered this yet. I have a drawing with a couple of profiles and some pipe networks. One alignment is collinear with the pipe network and another crosses the networks. I want to show the pipe crossing as well as the longitudinal on it companion alignment. If I set the profile setting for the pipe display to show the pipes crossing I don't get the longitudinal and if I try to assign the different style to the crossing pipes the plan view disappears. So, how should I set my styles to get a crossing pipe and a longitudinal in the same file?
Solved! Go to Solution.
Create a style for the crossing display. Assign this style to the pipe's Style Override in the ProfileView properties Pipe networks tab.
Perfect. I was lookig for something like that but couldn't see through my panic
This also helped me with a different problem I was having (so far at least). I would change the pipe style to my XING pipe style, save and leave the drawing. When I opened the drawing...all my xing's had changed back to a non-xing style! I tried it with the override and so far the styles seem to stick. This tip would have come in handy on another drawing long since gone now. Thanks!
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.