AutoCAD Civil 3D General

Reply
*Expert Elite*
Joe-Bouza
Posts: 4,496
Registered: ‎12-15-2008
Message 1 of 4 (894 Views)
Accepted Solution

Pipe Styles

894 Views, 3 Replies
03-23-2011 12:42 PM

I can't believe I haven't encountered this yet. I have a drawing with a couple of profiles and some pipe networks. One alignment is collinear with the pipe network and another crosses the networks. I want to show the pipe crossing as well as the longitudinal on it companion alignment. If I set the profile setting for the pipe display to show the pipes crossing I don't get the longitudinal and if I try to assign the different style to the crossing pipes the plan view disappears. So, how should I set my styles to get a crossing pipe and a longitudinal in the same file?

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Jeff_M
Posts: 3,966
Registered: ‎07-22-2003
Message 2 of 4 (888 Views)

Re: Pipe Styles

03-23-2011 01:11 PM in reply to: Joe-Bouza

Create a style for the crossing display. Assign this style to the pipe's Style Override in the ProfileView properties Pipe networks tab.

 

3-23-2011 1-08-54 PM.png

Jeff_M, also a frequent Swamper
*Expert Elite*
Joe-Bouza
Posts: 4,496
Registered: ‎12-15-2008
Message 3 of 4 (872 Views)

Re: Pipe Styles

03-23-2011 03:32 PM in reply to: Jeff_M

Perfect. I was lookig for something like that but couldn't see through my panic :smileyvery-happy:

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Active Contributor
Posts: 32
Registered: ‎05-18-2009
Message 4 of 4 (450 Views)

Re: Pipe Styles

07-19-2012 10:33 AM in reply to: Joe-Bouza

This also helped me with a different problem I was having (so far at least).  I would change the pipe style to my XING pipe style, save and leave the drawing.  When I opened the drawing...all my xing's had changed back to a non-xing style!  I tried it with the override and so far the styles seem to stick.  This tip would have come in handy on another drawing long since gone now.  Thanks!

Carl M. Fiorica, P.E., LEED A.P.
Burkett and Wong Engineers
3434 4th Ave
San Diego, CA 92103

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs