Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Mtext Bullets and Lists

1 REPLY 1
Reply
Message 1 of 2
CADDuser5678
362 Views, 1 Reply

Mtext Bullets and Lists

I have a large body of text that is numbered and i need to break it into two separate mtext blocks.  is there any way to keep the numbering continuous between the two blocks? every time i delete the redundant text in the second mtext block it starts my numbering over.

any thoughts?

1 REPLY 1
Message 2 of 2
troma
in reply to: CADDuser5678

Do you really need to break it up or can you use columns?

 

If you do need to break it, type the first number manually.  If your numbers are the default ones, you can type it like "9. "

That is whatever number, then a period, then tab.  You then may need to go to the end of the line, delete the return code and put it in again to renumber the next line to match.


Mark Green

Working on Civil 3D in Canada

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report