Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have several drawings that have mutliple viewports. If I try to move (for example up or down a couple of inches) a viewport in any of those drawings, Civil 3D locks up and becomes non-responsive. It appears to only happen to viewports that have been "clipped". Square polyagonal viewports have no problems.
You need to turn the VP off before moving and then turn it back on when you
get it in the correct spot. This is the only work around that I know of.
This is not solely a Civil 3D issue..... it has been around for a while
now... I do not clip VPs unless absolutely necessary . Good luck.
Tom
wrote in message news:5047758@discussion.autodesk.com...
Is anyone else having this problem:
I have several drawings that have mutliple viewports. If I try to move (for
example up or down a couple of inches) a viewport in any of those drawings,
Civil 3D locks up and becomes non-responsive. It appears to only happen to
viewports that have been "clipped". Square polyagonal viewports have no
problems.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")