AutoCAD Civil 3D General

Valued Contributor
Posts: 52
Registered: ‎06-19-2011
Message 1 of 2 (478 Views)
Accepted Solution

More Sampled Cross Sections into existing ones

478 Views, 1 Replies
10-10-2012 10:18 AM

I sampled my sections at 25 feet intervals, created my section view group and them plotted my cross section sheets. All look fine.My problem is that I need to include Station 21+17.40 and some other similar stations (in-between the 25 feet intervals) into my cross section sheets without deleting the existing Sample Line Group and Section View Group. Is there a way I can sample my desired additional sections and add them to the existing Sample Line Group and Section View Group and re-plotted my cross sections?

Active Contributor
Posts: 41
Registered: ‎06-24-2011
Message 2 of 2 (448 Views)

Re: More Sampled Cross Sections into existing ones

10-10-2012 04:28 PM in reply to: wizengr

All you need to do is run the CREATESAMPLELINES command once again and select the same alignment. Then you can type in the stations, along with the width that you need. Once you have the additional sample lines, create section views for the added sample lines and update the group layout.


If the missing station are polylines already, you can create sample lines out of them and save yourself a lot of time typing all those stations.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D