AutoCAD Civil 3D General Discussion

Reply
Active Member
LARRYGILL
Posts: 6
Registered: ‎03-08-2012
Message 1 of 5 (528 Views)

Missing EPSG codes for California NAD83 NSRS2007

528 Views, 4 Replies
03-08-2012 07:49 PM

The window for command MAPCSASSIGN is missing all EPSG codes for California for reference model

NAD83(NSRS2007).

 

There should be 6 EPSG codes for California state plane zones 1-6 in meter units, EPSG codes 3489, 3491, 3493, 3495, 3497, and 3499.

 

There should be 6 EPSG codes for California state plane zones 1-6 in Feet US units, EPSG codes 3490, 3492, 3494, 3496, 3498 and 3500.

 

There should also be EPSG code for California/Teale Albers Equal Area in Meters units EPSG code 3488 for statewide maps as mentioned in a previous post today.

 

AutoCad Civil 3D 2012 and Map 3D do not have any projections referenced to NAD83(NSRS2007).

The NAD83(NSRS2007) reference model was defined in 2005 and needs to be added.

NAD83(NSRS2007) is the current model described by National Geodetic Survey (NSG).

 

Why is this reference model not yet a part of Civil 3D 2012 or Map 3D 2012 ?

 

Please have someone from Autodesk contact me.

Product Support
AlmasSuljevic
Posts: 778
Registered: ‎08-11-2010
Message 2 of 5 (490 Views)

Re: Missing EPSG codes for California NAD83 NSRS2007

03-12-2012 12:06 PM in reply to: LARRYGILL

These codes are not implemented in Map yet. The issue you described is already reported to the development. Not sure where these will be added to the list of available coordinate systems. As a workaround you may need to add your custom coordinate systems. Instructions should be in help.

 

It would also be a good idea to take a look at these two links:

http://www.ngs.noaa.gov/NationalReadjustment/

http://surveying-mapping-gis.blogspot.com/2007/02/nad83-nsrs2007-is-now-online.html



Almas Suljevic
Product Support Specialist
Autodesk Global Subscription and Support
Autodesk, Inc.

Please click on "Accept as Solution" if post helped you resolve the issue.
Valued Mentor
IanMcClain
Posts: 440
Registered: ‎09-29-2008
Message 3 of 5 (472 Views)

Re: Missing EPSG codes for California NAD83 NSRS2007

03-13-2012 07:44 AM in reply to: AlmasSuljevic

I've been curious about this myself, but I don't see why another "zone" is necessary. In my mind the datum is NAD83 on a state place projection. The latestest iteration of the datum is NSRS2007, but still on the same projection. I have never understood what the difference between NAD83 CSP, Zone V and HARN (HPGN) CSP, Zone V is. If you have a drawing in one and another in the other, will you see a shift in xref or querry functions?

-Ian McClain
(running C3D 2012 sp4, Win7 64bit, 8GB)
Active Member
LARRYGILL
Posts: 6
Registered: ‎03-08-2012
Message 4 of 5 (453 Views)

Re: Missing EPSG codes for California NAD83 NSRS2007

03-14-2012 11:35 AM in reply to: LARRYGILL

After contacting NGS, I have been informed that NGS transformation parameters have not yet been established for NAD83(NSRS2007).  Therefore AutoCad cannot create the models.

 

I respectfully withdraw my discussion post until the time NGS creates the transformation parameters.

 

Larry Gill

Valued Contributor
rmacan
Posts: 74
Registered: ‎12-19-2005
Message 5 of 5 (321 Views)

Re: Missing EPSG codes for California NAD83 NSRS2007

01-10-2013 11:04 AM in reply to: LARRYGILL

Here's something I came across during my searches related to a transformation of data to NAD83(2007).

 

http://www.ngs.noaa.gov/NationalReadjustment/PSCannounce.html

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs