AutoCAD Civil 3D General

Reply
*Thomas Glidewell
Message 1 of 7 (271 Views)

Mid-Ordinate Distance with Breaklines

271 Views, 6 Replies
10-19-2007 06:17 AM
I have searched, but have not found, where can I set the default for my
mid-ordinate distance when adding breaklines to a surface. Would like to
change it from 1.0 to 0.1.
Thanks
*Dana Breig Probert
Message 2 of 7 (268 Views)

Re: Mid-Ordinate Distance with Breaklines

10-19-2007 10:00 AM in reply to: *Thomas Glidewell
I looked too.... seems that command is buried somehow inside the surface
creation command and may not be changeable... I will keep digging.

--
Dana Breig Probert, E.I.T.
The Book: http://www.masteringcivil3d.com
The Blog: http://www.civil3d.com
----------------------------------
Civil 3D 2008 SP1
AMD Athlon 64 X2 Dual Core 2.01 GHz
4GB RAM, 256 MB ATI FireGL V5200



"Thomas Glidewell" wrote in message
news:5754943@discussion.autodesk.com...
I have searched, but have not found, where can I set the default for my
mid-ordinate distance when adding breaklines to a surface. Would like to
change it from 1.0 to 0.1.
Thanks
*Thomas Glidewell
Message 3 of 7 (268 Views)

Re: Mid-Ordinate Distance with Breaklines

10-19-2007 10:35 AM in reply to: *Thomas Glidewell
Thanks. Not a huge deal just would be nice. One less thing to think about
you know.
"Dana Breig Probert" wrote in message
news:5755407@discussion.autodesk.com...
I looked too.... seems that command is buried somehow inside the surface
creation command and may not be changeable... I will keep digging.

--
Dana Breig Probert, E.I.T.
The Book: http://www.masteringcivil3d.com
The Blog: http://www.civil3d.com
----------------------------------
Civil 3D 2008 SP1
AMD Athlon 64 X2 Dual Core 2.01 GHz
4GB RAM, 256 MB ATI FireGL V5200



"Thomas Glidewell" wrote in message
news:5754943@discussion.autodesk.com...
I have searched, but have not found, where can I set the default for my
mid-ordinate distance when adding breaklines to a surface. Would like to
change it from 1.0 to 0.1.
Thanks
*Lisa Pohlmeyer
Message 4 of 7 (268 Views)

Re: Mid-Ordinate Distance with Breaklines

05-20-2008 02:26 PM in reply to: *Thomas Glidewell
Anybody ever find this?
--
Lisa Pohlmeyer
DC CADD - Austin, TX
Civil 3D 09
Intel Core 2 Duo,3Gb RAM
Nvidia Quadro Fx570M 512Mb

Thomas Glidewell wrote:
> Thanks. Not a huge deal just would be nice. One less thing to think about
> you know.
> "Dana Breig Probert" wrote in message
> news:5755407@discussion.autodesk.com...
> I looked too.... seems that command is buried somehow inside the surface
> creation command and may not be changeable... I will keep digging.
>
*Expert Elite*
Sinc
Posts: 6,207
Registered: ‎11-18-2006
Message 5 of 7 (268 Views)

Re: Mid-Ordinate Distance with Breaklines

05-20-2008 02:54 PM in reply to: *Thomas Glidewell
There is no option for this in 2008 and before. And if it has been added in 2009, I haven't been able to find it yet.
Sinc
*Lisa Pohlmeyer
Message 6 of 7 (269 Views)

Re: Mid-Ordinate Distance with Breaklines

05-20-2008 03:13 PM in reply to: *Thomas Glidewell
Yeah, it's 2009 I'm looking for, if it's there, it's buried pretty deep.
The only default mid-ordinate value I've been able to find is for
creating a feature line from an alignment. Nothing for adding
breaklines to surfaces.
--
Lisa Pohlmeyer


sinc wrote:
> There is no option for this in 2008 and before. And if it has been added in 2009, I haven't been able to find it yet.

--
Lisa Pohlmeyer
DC CADD - Austin, TX
Civil 3D 09
Intel Core 2 Duo,3Gb RAM
Nvidia Quadro Fx570M 512Mb
Contributor
trevj
Posts: 14
Registered: ‎11-15-2012
Message 7 of 7 (106 Views)

Re: Mid-Ordinate Distance with Breaklines

11-27-2012 06:14 AM in reply to: *Thomas Glidewell

I found what appears to be the option in

Toolspace -> Settings -> Surface -> Commands -> AddSurfaceBreaklines -> Add data options

I changed it to 0.05 and that figure is now greyed-out when I add the breaklines.

...But on viewing the surface it seems to have still used the default value (when using Proximty breaklines)!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs