AutoCAD Civil 3D General

Reply
Valued Mentor
kevin.barnett
Posts: 381
Registered: ‎08-13-2007
Message 1 of 6 (1,213 Views)
Accepted Solution

Maximum number of points in a C3D 2013 surface? 1.5 mill?

1213 Views, 5 Replies
05-04-2012 12:15 AM

C3D 2013. 64 bit. Windows 7.

 

Question 1.

In C3D 2013 is there a ceiling to the number of points allowable in a C3D surface? Is it 1.5 million?

 

Question 2.

In C3D 2013, when creating a surface from Point Cloud data is there a maximum point count based on the answer to question 1 - or is a different point count limit applied?

 

Thx.

Kevin.

 

Active Contributor
Wilbers2013
Posts: 35
Registered: ‎10-14-2008
Message 2 of 6 (1,189 Views)

Re: Maximum number of points in a C3D 2013 surface? 1.5 mill?

05-04-2012 06:57 AM in reply to: kevin.barnett

Number of points 17 143 972, read from a text file.  The text file size ± 560mb.

 

 Surface Propeties.png

___________________
Civil 3D 2011 & 2013
ArcGIS 10.1
*Expert Elite*
mathewk
Posts: 2,711
Registered: ‎07-09-2003
Message 3 of 6 (1,183 Views)

Re: Maximum number of points in a C3D 2013 surface? 1.5 mill?

05-04-2012 07:15 AM in reply to: kevin.barnett
Willie, is that the maximum number of points C3D can accomodate or is that just a surface you made? I don't think C3D has a limit per-se.

Regarding point clouds, I think there is a 1.5M point limit but I can't find any documentation to back that up.

For normal surfaces larger than that, C3D writes out to an external MMS file.
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
Active Contributor
Wilbers2013
Posts: 35
Registered: ‎10-14-2008
Message 4 of 6 (1,178 Views)

Re: Maximum number of points in a C3D 2013 surface? 1.5 mill?

05-04-2012 07:52 AM in reply to: mathewk

The surface was created from a file we received from a municipality and C3D writes a mms file.  Tha file took about 25min to load.  But afterthat, it worked quit fine.

 

I am not sure about the maximum amount of points that C3D can handle.

 

Have  a look at one one of the Autodesk University classes on point files.  It describes the way C3D handles Point Clouds in detail.

 

http://au.autodesk.com/?nd=class_listing&filter_keywords=point&chunk=15&filter_track=&filter_softwar...

___________________
Civil 3D 2011 & 2013
ArcGIS 10.1
*Expert Elite*
Sinc
Posts: 6,207
Registered: ‎11-18-2006
Message 5 of 6 (1,165 Views)

Re: Maximum number of points in a C3D 2013 surface? 1.5 mill?

05-04-2012 12:14 PM in reply to: kevin.barnett

We use Trimble Real Works to process our point cloud data.  We find the tools in that software are FAR superior to C3D's abilities.  (Don't have any experience with other scanners than Trimble, but suspect you may find something similar.)

 

So we use TRW to "prune" our point cloud data down to a reasonable level, then only import that smaller set of data into C3D.  We find that works much better.

Sinc
*Expert Elite*
BrianHailey
Posts: 2,749
Registered: ‎04-27-2005
Message 6 of 6 (1,144 Views)

Re: Maximum number of points in a C3D 2013 surface? 1.5 mill?

05-04-2012 03:50 PM in reply to: kevin.barnett

kevin.barnett wrote:

 

Question 2.

In C3D 2013, when creating a surface from Point Cloud data is there a maximum point count based on the answer to question 1 - or is a different point count limit applied?

 

 


From the 2013 help file: 

  1. Note

    The displayed value is the percentage of 1.5 million points, which is the maximum number of points that can exist in a drawing, regardless of the number of point clouds in the drawing.  

Althougth I can't find it in the help files right now, the surface will be created based on the points that are being displayed in the cloud. In other words, I have 3 million points in my point cloud. I've set the slider to the max so 1.5 million points are being displayed. I then stylize the point cloud so only the ground shots are displayed (I'll assume that's 50% of them) so we are now down to 750k points. I then draw a rectangle around a quarter of the point cloud to add those points to my surface so you are now down to around 190k points.

 

Hope that makes sense.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs