Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
If you build an intersection the "old school way", is there a way to manually lock the proposed profiles together at the centerline point of intersection?
Shoot, ideally, I'd also like to lock curb return profiles to street (lane) profiles, but I'm sure that's asking a bit much.
Thanks.
Windows 10-64 Pro 8GB RAM (Home) 12GB RAM (Work) AutoCAD Civil 3D 2019
Yes. use the wizard and clear the boxes to create assemblies and corridor
Joe Bouza Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You can do it anytime. To clarify: the check box to clear in the wizard is "create offset alignments"
Joe Bouza Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")