AutoCAD Civil 3D General

Reply
Valued Contributor
Posts: 97
Registered: ‎12-10-2002
Message 1 of 5 (411 Views)

MSE Retaining Wall Assembly?

411 Views, 4 Replies
05-27-2009 08:54 AM
Does anyone have a MSE Retaining Wall subassembly? or any type of retaining wall subassembly that does NOT have a footing or let me know where I can find one?

TIA
Contributor
chudlundgreen
Posts: 12
Registered: ‎07-06-2010
Message 2 of 5 (339 Views)

Re: MSE Retaining Wall Assembly?

02-09-2011 09:58 AM in reply to: inhl

I've been looking for one too.  I can't say I've found one.  I started making alignments for each layer of reinforcement which is very tedious and I don't recommend it. 

Distinguished Contributor
Posts: 148
Registered: ‎07-28-2009
Message 3 of 5 (320 Views)

Re: MSE Retaining Wall Assembly?

02-09-2011 02:53 PM in reply to: inhl

I did a project with an MSE wall recently and built the wall using generic links.  I did not model the tiebacks if that is what you need.  

 

I used a preliminary corridor to establish the toe-of-wall and top-of-wall profiles and alignments.  I can send you the road and wall assembly but it is pretty simple: From the shoulder a link width-and-slope targets the toe of wall, then a link slope-to-elevation targets the top-of-wall profile at a constant 1:6.  Then a link-to-marked-point targets a previously-marked point on the road shoulder to finish off the top of the wall. 

 

I used a separate corridor to develop the wall excavation volume. 

Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
Contributor
chudlundgreen
Posts: 12
Registered: ‎07-06-2010
Message 4 of 5 (309 Views)

Re: MSE Retaining Wall Assembly?

02-09-2011 04:15 PM in reply to: inhl

Yeah, I'm looking for a subassembly that has the reinforcement too.  But thanks for your help.  I might be able to try that and get some of a design.

Member
Posts: 4
Registered: ‎09-04-2012
Message 5 of 5 (105 Views)

Re: MSE Retaining Wall Assembly?

11-06-2012 10:53 AM in reply to: jeff_rivers

Hello, Jeff, I saw your post abbout the MSE wall ,  im trying to draw an mse retaing wall project, I been looking around if there is a lisp or a program that does that, any luck in your side?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs