Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
The following LinkMulti subassembly won't close, even though Sum(dW) = Sum(dZ) = 0:
Side: right
No. of Links: 7
Link Codes: Top, Datum
dW1: 0
dZ1: 0.5
dW2:0.5
dZ2:0
dW3: 0.083
dZ3: -0.515
dW4: 1.417
dZ4: -0.035
dW5: 0
dZ5: -0.5
dW6:-2.0
dZ6: 0.05
dW7: 0
dZ7: 0.5
Inputting the above links results in P2 about 0.001' right of the baseline and P8 (the end of the seventh link) being offset to the right of P1 by 0.003'.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")