Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
When I say 'no' to dropping the leading zero in the chord direction it seems to work (S7 degrees, becomes S07 degrees). But when I do the same to the delta it will add a zero to the beginning of all my entries. I attached an image to show this. Any idea what Im doing wrong?
You're not doing anything wrong. That's by design.
Delta angles can be 100 degrees or greater, so if you pad them with zeros, it pads them to three decimal places. There is no way to fine-tune this behavior; all you can do is either use leading zeros or don't use leading zeros.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")