AutoCAD Civil 3D General

Distinguished Contributor
Posts: 282
Registered: ‎11-14-2007
Message 1 of 3 (134 Views)
Accepted Solution

Lane Subassembly Issue

134 Views, 2 Replies
02-05-2014 08:56 AM

I have created an assembly with three different pavement thicknesses and widths using the "Basic Lane" subassembly. However, I cannot apply superelevation to my corridor (there is no superelevation parameter for this subassembly)? I have tried using the "LaneInsideSuperLayerVaryingWidth" and "LaneOutsideSuperLayerVaryingWidth" subassemblies but not only will the lane widths not work but they also have no superelevation parameters. See attachment.

*Expert Elite*
Posts: 1,881
Registered: ‎09-15-2010
Message 2 of 3 (112 Views)

Re: Lane Subassembly Issue

02-05-2014 10:24 AM in reply to: Rainman1

Choose one that supports superelevation such as LaneSuperelevationAOR.


It doesn't have the 3 pavement thicknesses your after but 2 lifts could be combined etc. to make it work.


Edit: Some of the Other "Super" lane sub.'s do provide 3 Pave parameters in them such as

LaneInsideSuperMultiLayer and LaneOutsideSuperMultiLayer.


C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
Distinguished Contributor
Posts: 282
Registered: ‎11-14-2007
Message 3 of 3 (67 Views)

Re: Lane Subassembly Issue

02-06-2014 05:36 AM in reply to: Jay_B

That works. I don't know why I didn't try that???? Thanks.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D