Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
When I create a pipe network in one drawing and then import it into another drawing with LandXML I get the following message: "Multiple Part Families with the correct geometry for Pipe [Pipe - (xx)] were found." for each pipe in each network. In the new drawing each pipe is set to the first pipe type in the part list which is different than the one in the pipe network in the original drawing. Both drawings were created with the same drawing template and parts list.
I'm having this same problem transitioning a project from Civil 3d 2006 to 2007 using XML. Same template and same parts list. Any help would be appreciated!
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")