AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
*Todd
Message 1 of 2 (51 Views)

Labeling TC based on CL

51 Views, 1 Replies
04-27-2005 02:01 PM

Our improvement plans need to show the TC at
Property lines.  I already have the centerline drawn.  What is the
best way to accomplish this?

 

I'd like it to look something like
this

 

10+00.00 PL

TC = 15.00
*Don Reichle
Message 2 of 2 (51 Views)

Re: Labeling TC based on CL

04-28-2005 04:38 PM in reply to: *Todd

Hey Todd;

 

Riverside County, CA?

 

As I'm familiar with doing this, but in
using Land's tools to accomplish it, I'm thinking that you could get your
Corridor Model Finish Surface complete and get the Spot Elevations at said TC.
Then you'll have to defeat the Dynamic nature (if applicable to Spots in C3D -
somebody help me out here) of the Elevation and move the tag to the Property
Corner.

 

As you can see from my signature I'm flying
somewhat blind (but hopeful) and guessing that you can create a Style to include
the Station from the Alignment in question, and the Elevation from the Surface
Model, but be able to turn off the Dynamic portion of the equation so that it
doesn't acquire the incorrect elevation based on its new location.

 

James Wedding addressed the limited
capabilities of the Corridor Model in a different post IIRC.

 

Hopefully Chakri or Himanshu will notice my
floundering around and correct my faulty data.

 

HTH - FWIW


--
Don Reichle
"King Of Work-Arounds"
"The only thing
worse
than training your staff,
and having them leave is -
not training
your staff,
and having them stay."
Courtesy Graphics Solution
Providers
--------------------------------------
LDT3/CD3
IntelP4-2.4
1GB
RAM
Intel 64MB

 

 


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">


Our improvement plans need to show the TC at
Property lines.  I already have the centerline drawn.  What is the
best way to accomplish this?

 

I'd like it to look something like
this

 

10+00.00 PL

TC =
15.00
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.