Hi,
when i try to lower the height from an Standard-Catalog-Structure "DACH Metric Structures - DACH Abwasserkanalschächte - AeccStructEccentricCylinder_Metric_Dach" it block at an certain level (1,622m).
With a diameter of 1000 mm there are products available with an height rim to cone top of an 1,05 m. why I not able to create this? (doesn't work with similar objekts from the Catalog)
I tried to find limits which might be possibly set in the Component-Builder, but found non.
Solved! Go to Solution.
Solved by Christian_Bauer. Go to Solution.
Please correct me, but this is due to the Parameter "Vertical Pipe Clearance" (SVPC), which controls the minimum Height of your Structure, which does not allow to have a Height less than this.
The "Vertical Pipe Clearance" is computed by: SVPC = SFH + SCH + SBPC
SFH Frame Height (List) 160 or 200 mm
SCH Cone Height (List) 600 mm
SBPC barrel Pipe Clearance (Constants) 600 mm
HTH
I tried this already, but it seem to be needed to oversize the element in first place and then switch to gain height by DEM (DGM).
Thanks for the quick support.