when i try to lower the height from an Standard-Catalog-Structure "DACH Metric Structures - DACH Abwasserkanalschächte - AeccStructEccentricCylinder_Metric_Dach" it block at an certain level (1,622m).
With a diameter of 1000 mm there are products available with an height rim to cone top of an 1,05 m. why I not able to create this? (doesn't work with similar objekts from the Catalog)
I tried to find limits which might be possibly set in the Component-Builder, but found non.
Solved! Go to Solution.
Please correct me, but this is due to the Parameter "Vertical Pipe Clearance" (SVPC), which controls the minimum Height of your Structure, which does not allow to have a Height less than this.
The "Vertical Pipe Clearance" is computed by: SVPC = SFH + SCH + SBPC
SFH Frame Height (List) 160 or 200 mm
SCH Cone Height (List) 600 mm
SBPC barrel Pipe Clearance (Constants) 600 mm
I tried this already, but it seem to be needed to oversize the element in first place and then switch to gain height by DEM (DGM).
Thanks for the quick support.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register