AutoCAD Civil 3D General Discussion

Reply
Member
sdrobs
Posts: 3
Registered: ‎04-10-2012
Message 1 of 8 (252 Views)
Accepted Solution

Invert Contours (Positive Elv to - Elv)

252 Views, 7 Replies
04-10-2012 11:48 AM

I have a contour map that i need to flip all the postive contours to negitive. So the Z cordinate for example is Elv 40 now i need to invert it to -40. I want to do this to the whole large contour map. ????

 

Shawn

*Expert Elite*
Alfred.NESWADBA
Posts: 8,888
Registered: ‎06-29-2007
Message 2 of 8 (250 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-10-2012 11:50 AM in reply to: sdrobs

Hi,

 

set the UCS to look from the right side (or from front) and then mirror your contours.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Distinguished Mentor
thepworth
Posts: 525
Registered: ‎03-02-2011
Message 3 of 8 (236 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-10-2012 12:59 PM in reply to: sdrobs

is it contour data or contours representing a TIN/DEM?

 

If its contours as CAD objects, you could use the Map3D side of C3D to perform a drawing query to multiply all contours by a (-1) value and then recreate the surface.  

 

I'm not a fan of surfaces from contours w/o the breaklines.  The software has gotten better, but there's still a loss.

 

The miserable brute-force way would be to export to xml and then replace the elevations with a "-" character.  dunno even where to approach that 


C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
Member
sdrobs
Posts: 3
Registered: ‎04-10-2012
Message 4 of 8 (217 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-10-2012 03:30 PM in reply to: sdrobs

Thank you, i will give that a try.

*Expert Elite*
BrianHailey
Posts: 2,749
Registered: ‎04-27-2005
Message 5 of 8 (208 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-10-2012 04:11 PM in reply to: sdrobs

Create a surface from the contours (do all the minimizing flat area options, you can read why HERE) if it's not already a surface. Create a flat surface at elevation 0 that's totally encompasses your surface. Create a volume surface that compares your surface as the base surface and the 0 surface as the comparison surface. Have the volume surface display contours. Extract the contours from the surface (if you don't want to have the surface).

Member
sdrobs
Posts: 3
Registered: ‎04-10-2012
Message 6 of 8 (207 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-10-2012 04:14 PM in reply to: sdrobs

Thank you so much, that worked.

 

Shawn

Distinguished Mentor
thepworth
Posts: 525
Registered: ‎03-02-2011
Message 7 of 8 (196 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-10-2012 08:49 PM in reply to: BrianHailey

Guess I was having a "blonde moment" when I didn't think of that one ealier - nice!


C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
*Expert Elite*
BrianHailey
Posts: 2,749
Registered: ‎04-27-2005
Message 8 of 8 (184 Views)

Re: Invert Contours (Positive Elv to - Elv)

04-11-2012 07:27 AM in reply to: thepworth

It's a technique I used to use in LDT to help delineate watershed boundaries, create an inverted surface and use the water drop tool on it.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs