AutoCAD Civil 3D General Discussion

Reply
Active Member
MJR_PE
Posts: 6
Registered: ‎07-12-2013
Message 1 of 3 (234 Views)

Intersection with multiple assemblies

234 Views, 2 Replies
11-06-2013 03:03 PM

I have a super-e road assembly as shown that is running into the intersection of a future road stub.  I can not figure out how to get the sidewalk to grade out in the intersection transition I have created for the curb return. Does anyone know a way to get throught this situation? Any ideas would be greatly appreciated. Thanks in advance. 

*Expert Elite*
sboon
Posts: 2,075
Registered: ‎11-08-2005
Message 2 of 3 (202 Views)

Re: Intersection with multiple assemblies

11-06-2013 07:15 PM in reply to: MJR_PE

If you're just trying to get the contours looking right then featurelines and grading objects are probably going to be your best choice.  Extract the back of curb line from your corridor.  Draw two more featurelines for the edges of the ramp from the curb up to the corridor sidewalk.  Finish up with a few gradings etc.

 

Steve
Please use the Accept as Solution or Kudo buttons when appropriate

Valued Mentor
fcernst
Posts: 1,089
Registered: ‎01-07-2011
Message 3 of 3 (156 Views)

Re: Intersection with multiple assemblies

11-07-2013 12:44 PM in reply to: MJR_PE

Implement a Conditional subassembly into the curb return assembly.

Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs