Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Imageclip boundary in 2014

8 REPLIES 8
Reply
Message 1 of 9
AllenJessup
391 Views, 8 Replies

Imageclip boundary in 2014

Am I seeing this right. Has the option to create a new image clip boundary by selecting a polyline been removed in 2014 (or 2013 we didn't use that)? I often use the same polyline to define a Surface Boundary an XClip and an ImageClip boundary. So much more difficult when you have to trace it out vertex by vertex!

 

Allen Jessup



Allen Jessup
Engineering Specialist / CAD Manager

8 REPLIES 8
Message 2 of 9
Jeff_M
in reply to: AllenJessup

Still there for me:

image clip.png

Jeff_M, also a frequent Swamper
EESignature
Message 3 of 9
AllenJessup
in reply to: Jeff_M

Interesting. I'll have to do some testing. I'm running 2014 that was part of the IDSP installation. I don't know if that makes any difference.

 

ic.PNG

 

This is the full run through of the command:

 

IMAGECLIP
Enter image clipping option [ON/OFF/Delete/New boundary] <New>: N
Delete old boundary? [No/Yes] <Yes>:
Enter clipping type [Polygonal/Rectangular] <Rectangular>: p
Specify first point:

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 4 of 9
Jeff_M
in reply to: AllenJessup

What happens if you choose New?

Jeff_M, also a frequent Swamper
EESignature
Message 5 of 9
AllenJessup
in reply to: Jeff_M

I just edited the last post to show that Smiley Happy



Allen Jessup
Engineering Specialist / CAD Manager

Message 6 of 9
AllenJessup
in reply to: Jeff_M

OK. Found it. When running Raster Design 2014. You DON'T get the polyline option. If I open the drawing in Civil 3D 2014 without Raster Design. I DO get the polyline option.

 

How weird is that? Smiley Surprised

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 7 of 9
Jeff_M
in reply to: AllenJessup

Just Autodesk's way of keeping us on our toes!

Jeff_M, also a frequent Swamper
EESignature
Message 8 of 9
AllenJessup
in reply to: Jeff_M

Of course that begs the question: "Why isn't it available in RD 2014?". But ours is not to question why...

 

Allen



Allen Jessup
Engineering Specialist / CAD Manager

Message 9 of 9
DaveM
in reply to: AllenJessup

It only makes sense that the software designed specifically for image manipulation be more difficult!

Thanks,
Dave

Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Please use Kudos Where Deserved



Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report