Hi,
I would like to create surface from contours and extract points (with value) from on it
I had contours in my drawing; each major and minor contours are single polyline with elevation (Z value).
If I create surface form CONTOUR, some polylines (major or minor) are not included in to surface.
After the creation of surface, I tried to erase the existing contour lines (Polyline) from drawing but the surface will be disappearing.
If I create the surface from ''DRAWING OBJECTS'', I'm not able to select the polylines (attachment 01)
Please advice
Thank you
Najeeb
Solved! Go to Solution.
Solved by Adam_Farnsworth. Go to Solution.
If I create surface form CONTOUR, some polylines (major or minor) are not included in to surface.
Is it possible that all the contours were included, but your surface style had an large interval that didn't display all the contours? (as in they're part of the definition, just not shown on the screen)
If you change the contour interval to a smaller spacing, do they appear?
Yes, now I found my mistake,
I tried to erase the existing contour lines (Polyline) from drawing but the surface is disappearing. Do I need to keep these polylines in drawing ?
regards
najeeb
I believe if you right click on the name of the surface in your Toolspace, you can select Create Snapshot that will keep it as it is.
But I would recommend not deleting those lines. Instead I would have a file dedicated to just the Existing Ground Surface (where you would keep the polylines), and then use the data shortcut to bring it into any file that you need.
Adam, thanks for your quick reply
One more thing, how about the points extracting from contours ?
regards
najeeb
I'm not sure what you mean by "extracting points," but it is possible to create points using the surface. Here's a picture how. I'm not sure if you'd want Random Points, or On Grid, but I'm sure you can play with both to figure out what you need.
If you are adding contour data to a surface, make sure you read this first: http://civil3dplus.wordpress.com/2011/08/13/adding-contours-to-a-surface-youre-doing-it-wrong/
Brian, I read your Blog and it is very helpful. My problem is I have a site that is very flat and has a lot of closed polylines for contours. Instead of making them closed it is trying to connect them together. I used the attached settings when adding the contours and still got the attached results. I've tried many other settings with about the same results.
Any ideas would be appreciated.
@gjcbachman wrote:
Brian, I read your Blog and it is very helpful. My problem is I have a site that is very flat and has a lot of closed polylines for contours. Instead of making them closed it is trying to connect them together. I used the attached settings when adding the contours and still got the attached results. I've tried many other settings with about the same results.
Any ideas would be appreciated.
Can you share the contours?
I'm tryin to attach the contour file but I'm getting an error: "The file is corrupted. Please udate a valid file". I don't think there is anything wrong with it, it is about 1.7mb.
Try using Dropbox or Google Drive (or similar service) and share a link.
Brian,
Here is a link to the file on Dropbox.
https://www.dropbox.com/sh/s7ud5abga9o6kcp/QYKg--6Z9G
Thank you for your help.
Can't find what you're looking for? Ask the community or share your knowledge.