Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Hatching Problem

1 REPLY 1
Reply
Message 1 of 2
vdeikhof
367 Views, 1 Reply

Hatching Problem

Has anyone out there encountered this. In Shape Styles in Multipurpose Settings I have changed my component hatch display to something other than solid so my sections would look correct. For example, I changed Curb to AR-CONC with a scale of 0.20 so the hatch will show up correctly in my drawing. Now I get a "Warning: Hatch pattern is too dense" each time the drawing regenerates. I increased my MaxHatch to the maximum of 10000000 and still get the error. The program doesn't crash and the hatching looks fine on screen and plotted out. I just get that warning message repeatedly.

Jeff van den Eikhof
Director of Civil Engineering
Geo-West Land Consultants, Inc.
1 REPLY 1
Message 2 of 2
josherk
in reply to: vdeikhof

Hi Jeff,

The cause of this warning is the fact that you chose anything other than SOLID for your corridor shapes. Using regular hatch patterns actually creates more objects for the drawing to work with; hence the problem with performance and this warning.
The setting of MaxHatch makes no difference.

Jos van Herkhuizen
Provincie Noord-Brabant
Netherlands

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report