Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I'm wanting to get out of a berm and reach the top edge with a ramp, and this ramp hold the same proportion of the slope in the cross slope is (according to the attached drawings want to keep the ratio 2:1). Had something in civil 3d feature line or other method that makes automatic? I would like to know the hand that has something more automated in civil 3d to do so.
What you need is a tool that traces a path along a terrain at a specific slope. There are several posts on this topic. Note some posts refer to a custom tool by Terry Dotson.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")