HEC3 analysis needed

[Anonymous]

Is there an add on to the Civil Design companion that will perform an HEC3 drainage calculation?

[Anonymous]

Ian OB wrote:
> Is there an add on to the Civil Design companion that will perform an HEC3 drainage calculation?

Civil Design? Wrong group, sorry....

Civil 3D....hmmmm, I wonder......

http://www.civil3d.com/2006/06/beta-version-available.html

I feel like a pimp.....

--
Jason Hickey

Civil 3D 2007, SP1A
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

http://beneaththelines.blogspot.com

[Anonymous]

Jason Hickey wrote:

>
> http://www.civil3d.com/2006/06/beta-version-available.html
>
> I feel like a pimp.....
>

ooops, wrong HEC....sorry.

--
Jason Hickey

Civil 3D 2007, SP1A
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

http://beneaththelines.blogspot.com

[Anonymous]

>>I feel like a pimp.....<<

Now what do I say to that?

No I give you a pass just 'cause.

John Postlewait
IS Department
George butler Associates, Inc.

[saluki]

What type of drainage calculation do you want to perform?

I am not familiar with HEC 3, it's not listed on the HEC website.

thanks

[Anonymous]

If s/he is indeed looking for a HEC RAS solution, your link is a good one.

So far, I have been impressed.

Dana

--
Dana Breig Probert
http://civil3drocks.blogspot.com/
CADapult Ltd
Empowering Design With Innovative Solutions
www.cadapult.net
----------------------------------------------
"Jason Hickey" wrote in message
news:5252266@discussion.autodesk.com...
Ian OB wrote:
> Is there an add on to the Civil Design companion that will perform an HEC3
> drainage calculation?

Civil Design? Wrong group, sorry....

Civil 3D....hmmmm, I wonder......

http://www.civil3d.com/2006/06/beta-version-available.html

I feel like a pimp.....

--
Jason Hickey

Civil 3D 2007, SP1A
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

http://beneaththelines.blogspot.com

[Anonymous]

You obviously know when it's the "proper" time to speak your mind John.
;-)

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


wrote in message news:5252338@discussion.autodesk.com...
>>I feel like a pimp.....<<

Now what do I say to that?

No I give you a pass just 'cause.

John Postlewait
IS Department
George butler Associates, Inc.

[Anonymous]

Google can find them saluki:
http://tinyurl.com/eg8zl

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


wrote in message news:5252357@discussion.autodesk.com...
What type of drainage calculation do you want to perform?

I am not familiar with HEC 3, it's not listed on the HEC website.

thanks

[saluki]

Come on Don . . . your link found

Parallel byte processing engines shared among multiple data channels

Typically HEC documents are found on

http://www.fhwa.dot.gov/engineering/hydraulics/library_listing.cfm

or

http://www.fhwa.dot.gov/engineering/hydraulics/library_listing.cfm?archived=true

I didn't see HEC-3 listed . . . I did find

CPD-3A HEC-3, Reservoir System Analysis for Conservation,
User's Manual, Mar 81, 110 pp. AD-A235 645

at

http://www.hec.usace.army.mil/publications/pub_catalog.html

I was just curious what calculations he was working on.

Thanks for the link ; )

It's pretty sad we have nothing better to do on a Friday night, than this.

Have a good weekend.

[Anonymous]

snip>It's pretty sad we have nothing better to do on a Friday night, than
this.
Says you - I'm working on revising a certain Swale's Profile, and producing
the revised 3D Polylines for the inclusion into the FG Surface in a few more
minutes. 😉

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


wrote in message news:5252447@discussion.autodesk.com...
Come on Don . . . your link found

Parallel byte processing engines shared among multiple data channels

Typically HEC documents are found on

http://www.fhwa.dot.gov/engineering/hydraulics/library_listing.cfm

or

http://www.fhwa.dot.gov/engineering/hydraulics/library_listing.cfm?archived=true

I didn't see HEC-3 listed . . . I did find

CPD-3A HEC-3, Reservoir System Analysis for Conservation,
User's Manual, Mar 81, 110 pp. AD-A235
645

at

http://www.hec.usace.army.mil/publications/pub_catalog.html

I was just curious what calculations he was working on.

Thanks for the link ; )

It's pretty sad we have nothing better to do on a Friday night, than this.

Have a good weekend.

[Anonymous]

And BTW - glad to help in any way, shape or form. 😉

Have a good evening, morning or afternoon - wherever you are!

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


"Don Reichle" wrote in message
news:5252469@discussion.autodesk.com...
snip>It's pretty sad we have nothing better to do on a Friday night, than
this.
Says you - I'm working on revising a certain Swale's Profile, and producing
the revised 3D Polylines for the inclusion into the FG Surface in a few more
minutes. 😉

--
Don Reichle
"The only thing worse
than training your staff,
and having them leave is -
not training your staff,
and having them stay."
Courtesy Graphics Solution Providers
----------------------------------------------------------
!! Please discuss whatever we tell you with your SysMgr !!
!! They appreciate staying in the loop 🙂 !!

LDT/CD-2K4
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".


wrote in message news:5252447@discussion.autodesk.com...
Come on Don . . . your link found

Parallel byte processing engines shared among multiple data channels

Typically HEC documents are found on

http://www.fhwa.dot.gov/engineering/hydraulics/library_listing.cfm

or

http://www.fhwa.dot.gov/engineering/hydraulics/library_listing.cfm?archived=true

I didn't see HEC-3 listed . . . I did find

CPD-3A HEC-3, Reservoir System Analysis for Conservation,
User's Manual, Mar 81, 110 pp. AD-A235
645

at

http://www.hec.usace.army.mil/publications/pub_catalog.html

I was just curious what calculations he was working on.

Thanks for the link ; )

It's pretty sad we have nothing better to do on a Friday night, than this.

Have a good weekend.

[Anonymous]

jpostlewait wrote:

> Now what do I say to that?
>
> No I give you a pass just 'cause.

I can't comment publicly, but every now and then I feel like I'm the
exact OPPOSITE from a pimp 😉

--
Jason, still here on a weekend afternoon

[Anonymous]

There is a working addon produced by Cadapps in Australia
www.cadapps.com.au
It is part of a product called ARD and produces a ***.g01 file.
It also can read the output file from HEC3 back into C3D
I have used it for a few years now and it works well.
regards
Lindsay Wratten