From this thread http://forums.autodesk.com/t5/AutoCAD-Civil-3D/Geotechnical-Module-Stability-in-2014/td-p/3940095 the current (30 May) advice from Autodesk is to uninstall the Geotechnical module due to "performance issues"
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Jessica
I'll just post them up here so others can comment as well...
1. The ability to Shift Click or Crtrl Click multiple boreholes to toggle the tick boxes for strips etc. Whilst it is possible to Shift click and Ctrl Click to select multiple boreholes (for Ctrl-C and Ctrl-V to Excel see 2. below) it is only possible to tick each borehole/trial pit individually which is very tedious - this is a "must do" sooner rather than later.
2. Whilst the ability to turn on/off strata surfaces is welcome, the fundamental flaw in this approach is that each stratum is built up from the absolute level in each borehole. This may not be a major problem with a relatively flat site but in steep mountainous or undulating terrain the surfaces become a bit pointless. What is required is the ability to use the borehole depths to create a surface and then use other Civil 3D techniques to develop a stratum surface that more accurately reflect the ground topography (whilst appreciating that this is not always true). As intimated in 1 above, standard Windows copy and paste techniques can be used to generate the relevant files via Excel but it would be good if the geotech module could generate Point Groups of this information - all the information is present but it is not easy to extract especially from a native ags file.
Thanks
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Igual al momento de trabajar los archivos en red local produce este error, si alguien tiene alguna solucion se los agradeceria mucho ahi les dejo una imagen del mismo!
Gracias..!
As when working in local network files this error occurs, if anyone has any solution would greatly appreciate there are those I leave a picture of it!
Thank you ..!
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.