AutoCAD Civil 3D General

Reply
Distinguished Contributor
csevers
Posts: 142
Registered: ‎10-28-2011
Message 1 of 7 (230 Views)
Accepted Solution

Flippable label

230 Views, 6 Replies
01-14-2014 09:25 AM

I've got an alignment label style I created and I would like to be able to flip the label over my alignment if necessary, similar to station labels. I can't find anywhere in the label style composer were I can specify this option. 

Chris Severs, EI
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
Valued Mentor
owenmull
Posts: 356
Registered: ‎09-06-2011
Message 2 of 7 (220 Views)

Re: Flippable label

01-14-2014 10:25 AM in reply to: csevers

Is this what you're seeking?

 

 

Flip.png

-Owen
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Distinguished Contributor
csevers
Posts: 142
Registered: ‎10-28-2011
Message 3 of 7 (213 Views)

Re: Flippable label

01-14-2014 10:33 AM in reply to: owenmull

Yes, exactly. I would like to be able to select that option for a label that I create.

 

 

flip label.JPG

Chris Severs, EI
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
Valued Contributor
Bill_Myron
Posts: 91
Registered: ‎05-13-2009
Message 4 of 7 (176 Views)

Re: Flippable label

01-14-2014 03:00 PM in reply to: csevers

Alignment labels are part of a set. 

If you want to have them ALL on one side, adjust the rotation of the label components in the editor.

If you want only a select FEW then h
old Ctr (Control) and select the label. You will then have the option to flip it.

 

Distinguished Contributor
csevers
Posts: 142
Registered: ‎10-28-2011
Message 5 of 7 (171 Views)

Re: Flippable label

01-14-2014 03:17 PM in reply to: Bill_Myron

I think you're thinking of the station and geometry labels, I'm talking about Station Offset type alignment labels. It's kinda a mute point as I've made 2 additional styles to dispaly on the "flipped" side of the alignment, but i'm curious if there's a way to incorporate the same functionality as the station and geometry labels into a station offset label. 

Chris Severs, EI
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
*Expert Elite*
Jeff_M
Posts: 4,178
Registered: ‎07-22-2003
Message 6 of 7 (167 Views)

Re: Flippable label

01-14-2014 03:39 PM in reply to: csevers

No, there's not. You just need to have the different styles as you've done.

Jeff_M, also a frequent Swamper
Distinguished Contributor
csevers
Posts: 142
Registered: ‎10-28-2011
Message 7 of 7 (160 Views)

Re: Flippable label

01-14-2014 04:04 PM in reply to: Jeff_M

Thanks

Chris Severs, EI
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs