Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Flippable label

6 REPLIES 6
SOLVED
Reply
Message 1 of 7
csevers
1176 Views, 6 Replies

Flippable label

I've got an alignment label style I created and I would like to be able to flip the label over my alignment if necessary, similar to station labels. I can't find anywhere in the label style composer were I can specify this option. 

Chris Severs, PE
Windows 7 Enterprise SP1 64 bit
64.0 GB RAM
Intel Xeon E5-2650 v3 @ 2.30GHz
NVIDA Quadro M4000
Civil 3D 2014
6 REPLIES 6
Message 2 of 7
owenmull
in reply to: csevers

Is this what you're seeking?

 

 

Flip.png

-Owen
Windows 7 x 64 bit

Civil 3D 2017
______________________________________________________________
Usually, I find that the problem is between the keyboard and the chair.
Message 3 of 7
csevers
in reply to: owenmull

Yes, exactly. I would like to be able to select that option for a label that I create.

 

 

flip label.JPG

Chris Severs, PE
Windows 7 Enterprise SP1 64 bit
64.0 GB RAM
Intel Xeon E5-2650 v3 @ 2.30GHz
NVIDA Quadro M4000
Civil 3D 2014
Message 4 of 7
Bill_Myron
in reply to: csevers

Alignment labels are part of a set. 

If you want to have them ALL on one side, adjust the rotation of the label components in the editor.

If you want only a select FEW then h
old Ctr (Control) and select the label. You will then have the option to flip it.

 

Message 5 of 7
csevers
in reply to: Bill_Myron

I think you're thinking of the station and geometry labels, I'm talking about Station Offset type alignment labels. It's kinda a mute point as I've made 2 additional styles to dispaly on the "flipped" side of the alignment, but i'm curious if there's a way to incorporate the same functionality as the station and geometry labels into a station offset label. 

Chris Severs, PE
Windows 7 Enterprise SP1 64 bit
64.0 GB RAM
Intel Xeon E5-2650 v3 @ 2.30GHz
NVIDA Quadro M4000
Civil 3D 2014
Message 6 of 7
Jeff_M
in reply to: csevers

No, there's not. You just need to have the different styles as you've done.

Jeff_M, also a frequent Swamper
EESignature
Message 7 of 7
csevers
in reply to: Jeff_M

Thanks

Chris Severs, PE
Windows 7 Enterprise SP1 64 bit
64.0 GB RAM
Intel Xeon E5-2650 v3 @ 2.30GHz
NVIDA Quadro M4000
Civil 3D 2014

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report