AutoCAD Civil 3D General

Reply
Distinguished Contributor
GreeneSWCD
Posts: 172
Registered: ‎03-29-2011
Message 1 of 4 (139 Views)
Accepted Solution

Extracting Cross Sections help

139 Views, 3 Replies
11-28-2012 06:05 AM

I have an alignment going up the center of a draw.  I'd like to extract cross sections of this alignment and existing ground.  What is a good way to do this? 

 

I don't do cross sections very often, so when I need one, I draw a second alignment perpendicular to the first and profile that alignment to give me a bare bones cross section.  I'd like to do these cross sections on a given interval, and at every change in direction.  How should I go about it? 

 

Thanks.

Valued Contributor
bo.martin
Posts: 58
Registered: ‎06-12-2010
Message 2 of 4 (136 Views)

Re: Extracting Cross Sections help

11-28-2012 06:19 AM in reply to: GreeneSWCD

My method....

 

I chose these from the menu bar, So be sure to have it turned on.

 

Create a profile 1st.

Sections>Create Sample Lines

Sections>Create Section View

 

Hopefully you have a Style created.

 

Good Luck,

 

Bo

*Expert Elite*
Posts: 2,501
Registered: ‎05-21-2008
Message 3 of 4 (121 Views)

Re: Extracting Cross Sections help

11-28-2012 07:08 AM in reply to: bo.martin

In the create sample lines command there are options to create by station; where you click the location or type the station, or to create by range; where you set the start point, end point and the interval.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Distinguished Contributor
GreeneSWCD
Posts: 172
Registered: ‎03-29-2011
Message 4 of 4 (118 Views)

Re: Extracting Cross Sections help

11-28-2012 07:11 AM in reply to: troma

I'm getting there, thanks guys. 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs