Expressions

[Anonymous]

Is there a way to write an expression to divide the
area of one site parcel by the area of a different site
parcel?

--
Joe

Joseph D. Bouza, P.E.
Civil 3D 2006/2008
LDT 2006/2008
Win XP
pro
v 2002, sp 2
hp workstation
xw4100
*****************************************************************************************
In
memory of the King of Work-arounds
"The only Constant is Change".

"The only thing worse than training your staff, and having them leave is
-
not training your staff, and having them stay." 😮
A reminder taken
from Graphics Solution Providers' Calendar
page
*****************************************************************************************

[Matt.Anderson]

You almost need to add a User Defined Property to your parcel. It will not be dynamic.

[Anonymous]

Surface cover?

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
"Joe Bouza" wrote in message
news:5894309@discussion.autodesk.com...
Is there a way to write an expression to divide the area of one site parcel
by the area of a different site parcel?

--
Joe

Joseph D. Bouza, P.E.
Civil 3D 2006/2008
LDT 2006/2008
Win XP pro
v 2002, sp 2
hp workstation xw4100
*****************************************************************************************
In memory of the King of Work-arounds
"The only Constant is Change".

"The only thing worse than training your staff, and having them leave is -
not training your staff, and having them stay." 😮
A reminder taken from Graphics Solution Providers' Calendar page
*****************************************************************************************

[Anonymous]

Too bad that would be the whole idea. (:-o


wrote in message news:5894398@discussion.autodesk.com...
You almost need to add a User Defined Property to your parcel. It will not
be dynamic.

[Matt.Anderson]

For example - the overall Site Area would be static - the area of the parcel would be dynamic and the division or percentage of the parcel would be dynamic.

Parcel A (dynamic) divided by Overall Parcel Area (Manual entry - static)...

[Anonymous]

Getting C3D data into AutoCAD Fields would be an incredible solution for us.

We have to use an AutoCAD table to get a somewhat dynamic result with
dragging/grip editing to produce what we need.

I have tried to place parcel, alignment & line/curve tables next to each
other with similar formats but you can't perform any math.

I am always open to new ideas so if anyone has any I'm listeneing. Has
anyone had success using MAP functions to produce the attached?

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
"Joe Bouza" wrote in message
news:5894851@discussion.autodesk.com...
Too bad that would be the whole idea. (:-o


wrote in message news:5894398@discussion.autodesk.com...
You almost need to add a User Defined Property to your parcel. It will not
be dynamic.

[Anonymous]

This is what should have been posted. It's in my Sent Items but not here??

Getting C3D data into AutoCAD Fields would be an incredible solution for us.

We have to use an AutoCAD table to get a somewhat dynamic result with
dragging/grip editing to produce what we need.

I have tried to place parcel, alignment & line/curve tables next to each
other with similar formats but you can't perform any math.

I am always open to new ideas so if anyone has any I'm listening. Has
anyone had success using MAP functions to produce the attached?

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
"John Mayo" wrote in message
news:5895189@discussion.autodesk.com...
Getting C3D data into AutoCAD Fields would be an incredible solution for u

[Anonymous]

Now I will try the attachment.

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
"John Mayo" wrote in message
news:5895243@discussion.autodesk.com...
This is what should have been posted. It's in my Sent Items but not here??

Getting C3D data into AutoCAD Fields would be an incredible solution for us.

We have to use an AutoCAD table to get a somewhat dynamic result with
dragging/grip editing to produce what we need.

I have tried to place parcel, alignment & line/curve tables next to each
other with similar formats but you can't perform any math.

I am always open to new ideas so if anyone has any I'm listening. Has
anyone had success using MAP functions to produce the attached?

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
"John Mayo" wrote in message
news:5895189@discussion.autodesk.com...
Getting C3D data into AutoCAD Fields would be an incredible solution for u

[Matt.Anderson]

Only with Polylines and Fields...nothing that detailed and mainly for H & H analysis.

Being able to query or use Design Data from the Civil 3d objects dynamically would be a HUGE plus.

But alas...

John - it looked like it got posted - I responded to your first post... Message was edited by: MAnderson

[Anonymous]

Ditto, we drag/grip edit plines & dimension objects to get the data.

Seems the server is having an issue with attachments today. I twice tried to
send a small png w/o success.

--
John Mayo, PE
Project Engineer
Conklin Associates
Ramsey, NJ

Civil 3D 2008 SP2, LDT 2008 SP2, Raster Design 2008
P-IV at 3.5 GHz
2 GB Ram
Nvidea Quadro FX w/ 128 MB Ram
wrote in message news:5895250@discussion.autodesk.com...
Only with Polylines and Fields...nothing that detailed and mainly for H & H
analysis.

Being able to query or use Design Data from the Civil 3d objects dynamically
would be a HUGE plus.

But alas...