Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Exporting curved feature lines and retaining the elevations
Exporting curved feature lines and retaining the elevations
is it possible to convert feature line from one civil 3d 2014 file to other by only copy it with base point and paste it in other file with the same elevations and grade?? or have to do something else?
The most direct way is to copy to the clip board using the base point option (origin coordinates 0,0) and paste to the new drawing using the same origin.
Neil Wilson (a.k.a. neilw) AEC Collection/C3D 2024, LDT 2004, Power Civil v8i SS1 WIN 10 64 PRO
We don't have any effect on elevations or any other thing .. . Disclaimer - This email and any files transmitted with it are confidential and contain privileged or copyright information. You must not present this message to another party without gaining permission from the sender. If you are not the intended recipient you must not copy, distribute or use this email or the information contained in it for any purpose other than to notify us. If you have received this message in error, please notify the sender immediately, and delete this email from your system. We do not guarantee that this material is free from viruses or any other defects although due care has been taken to minimize the risk.