AutoCAD Civil 3D General

Reply
Employee
Posts: 707
Registered: ‎08-25-2009
Message 11 of 16 (215 Views)

Re: Daylight to offset with maximum slope

11-08-2012 10:56 AM in reply to: sboon

Well I applaud the creative use of conditionals and generic links, take a look at the PKT file that I posted. The logic inside it is pretty straight forward and should be a good starting point for a solution.

 

Cheers,

 

Peter Funk

Autodesk, Inc.



Peter Funk
Autodesk, Inc.

Member
Posts: 4
Registered: ‎11-07-2012
Message 12 of 16 (212 Views)

Re: Daylight to offset with maximum slope

11-08-2012 11:23 AM in reply to: peterfunkautodesk

I imported the .pkt file as a subassembly and it seem to import fine, it gave it a "tool pallete button" with the associated name and such. However there where no parameters to adjust inside, it appeared to be an "empty shell".  Furthermore, using it produced and error

 

 [DaylightWithClearZone was created with Subassembly Composer, please visit Autodesk website (http://usa.autodesk.com/adsk/servlet/ps/dl/index?siteID=123112&id=2334440&linkID=9240698) to download the enabler extension.]  (Source: DaylightWithClearZon

 


Looks like i need to download an extension. I will try to find what i need at the website.

Employee
Posts: 707
Registered: ‎08-25-2009
Message 13 of 16 (207 Views)

Re: Daylight to offset with maximum slope

11-08-2012 11:39 AM in reply to: DenverDave

I made that with the 2012 Subassembly Composer. It doesn't have any parameters for adjusting the offset etc, but those could be added.

 

Peter Funk

Autodesk, Inc.



Peter Funk
Autodesk, Inc.

Distinguished Contributor
sadekcivil
Posts: 142
Registered: ‎10-19-2011
Message 14 of 16 (158 Views)

Re: Daylight to offset with maximum slope

12-31-2012 11:04 AM in reply to: peterfunkautodesk

can you upload your subassembly because the page didn't found

Please do not forget approve as solutions and Points
to Remember Please Accept as Solution and Kudos Please
*Expert Elite*
wfberry
Posts: 1,610
Registered: ‎09-05-2006
Message 15 of 16 (137 Views)

Re: Daylight to offset with maximum slope

01-01-2013 05:39 AM in reply to: sadekcivil

Sadek:

 

It was a download and should have been downloaded to your browser's download directory (folder).

 

Bill

 

Distinguished Contributor
sadekcivil
Posts: 142
Registered: ‎10-19-2011
Message 16 of 16 (132 Views)

Re: Daylight to offset with maximum slope

01-01-2013 06:20 AM in reply to: wfberry

Bill

 

See attached file, that is what i got

Please do not forget approve as solutions and Points
to Remember Please Accept as Solution and Kudos Please

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs