AutoCAD Civil 3D General

Reply
Active Member
cman24
Posts: 10
Registered: ‎01-25-2013
Message 1 of 6 (408 Views)

Datum Surface not Consistent

408 Views, 5 Replies
01-29-2013 06:13 AM

Anyone know why a Datum Surface will correctly follow the bottom links of a corridor at 1 location but not another?

 

Please see attached.  The 2 stations shown use the same assembly and are in the same region. Some locations appear to be correct, while a few other locations "skip" points they are supposed to hit.

*Expert Elite*
jmayo
Posts: 2,699
Registered: ‎11-13-2006
Message 2 of 6 (389 Views)

Re: Datum Surface not Consistent

01-29-2013 08:19 AM in reply to: cman24

Did you toggle the overhang correction to 'bottom links'?

John Mayo, PE
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
Active Member
cman24
Posts: 10
Registered: ‎01-25-2013
Message 3 of 6 (386 Views)

Re: Datum Surface not Consistent

01-29-2013 08:22 AM in reply to: cman24

Yep. 

 

I am hoping I am just missing something simple like that, but I just can't figure out what it is.  It wouldn't be so frustrating if the error occured at every location, but the fact that it works at some and not others is just confusing.

Mentor
david.zavislan
Posts: 254
Registered: ‎10-31-2006
Message 4 of 6 (354 Views)

Re: Datum Surface not Consistent

01-30-2013 07:46 AM in reply to: cman24

If you look at the surface triangulation in plan view you will probably see that the tin lines are not created correctly along the vertical portion of the datum.   Two ways to fix this:

 

1. Reduce the frequency distance.  This will output more link data to the surface, which should cause the triangles to form correctly between the adjacent corridor sections.

 

2. Or, add feature lines from the top and toe point codes.

AddCorridorFeaturelinesToSurface.jpg

David Zavislan, P.E. | Wood Rodgers, Inc.
Employee
peterfunkautodesk
Posts: 707
Registered: ‎08-25-2009
Message 5 of 6 (345 Views)

Re: Datum Surface not Consistent

01-30-2013 08:46 AM in reply to: david.zavislan

What subassembly was used to create the curb? It looks like you have three points at the same place vertically and this is causing the TIN "issues". We've tried to make our internal subassemblies have a very slight offset (moving to away from the centerline) to avoid these conditions.

 

Regards,

 

Peter Funk

Autodesk, Inc.



Peter Funk
Autodesk, Inc.

Active Member
cman24
Posts: 10
Registered: ‎01-25-2013
Message 6 of 6 (333 Views)

Re: Datum Surface not Consistent

01-30-2013 02:33 PM in reply to: cman24

This is a subassembly from our Client (WisDOT).  I've experienced issues before related to the vertical stacking of points.  There is a slight offset with this subassembly, but maybe it's not enough of an offset.  I just found it odd that it worked in some locations and not others.  I think I will just have to apply a work-around like what David suggested until I can get an update to this subassembly.

 

Thanks for the help.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs