AutoCAD Civil 3D General

Reply
New Member
Posts: 2
Registered: ‎01-03-2013
Message 1 of 4 (221 Views)
Accepted Solution

Creating Points according to elevation

221 Views, 3 Replies
01-03-2013 04:51 AM

Hello all,

 

I have a number of 3D polylines that where exported from SDF previously created. They have numerous vertices, each one with a given elevation.

 

Could someone help me by tellling me how can i create/highlight the higher and/or lower point in each 3D polyline??

 

A different solution would be automatically breaking these polylines in slope changing points (i.e. high or low points).

 

I understand that i can create points according to slope or elevation, but it has to be done manually, each poly at a time, and by tipping numeric values that i am sure that a powerfull software (as Civil 3D is) is able to calculate using the drawing information.

 

Thank you very much in advance by your help.

 

Rui

*Expert Elite*
Jeff_M
Posts: 3,957
Registered: ‎07-22-2003
Message 2 of 4 (203 Views)

Re: Creating Points according to elevation

01-03-2013 05:56 AM in reply to: rbprata

Perhaps you will find THIS useful.

Jeff_M, also a frequent Swamper
*Expert Elite*
AllenJessup
Posts: 5,616
Registered: ‎05-21-2003
Message 3 of 4 (196 Views)

Re: Creating Points according to elevation

01-03-2013 06:23 AM in reply to: rbprata

You could create points on the polyline then sort the point list by elevation.

New Member
Posts: 2
Registered: ‎01-03-2013
Message 4 of 4 (156 Views)

Re: Creating Points according to elevation

01-04-2013 02:59 AM in reply to: Jeff_M

Dear Jeff,

 

indeed i found what you sent me very usefull...thank you very much

 

Best regards

 

Rui

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs