And Brian...
Maybe think about using Invert Colors on your Screen Captures when there's a
lot of black in the background.
Uses a significant amount of toner when printed. :-)
I was lazy so printed instead of switching back and forth from post to post.
--
Don Reichle
Hacker Engineering, Inc.
"King of Work-Arounds"
LDT & CD 2004
C3D 2004 SP1
On HP Pavilion a367c
2.80 Ghz/512MB RAM
XP PRO - SP2
"Don Reichle" wrote in message
news:41a25a86$1_3@newsprd01...
Brian;
What I've done (in Land) is just break the 3D polys at the edges of the
intersections, and then manually configure the intersection.
Just thinking out loud here...
Maybe Region 2 would only be a half-street improvement?
--
Don Reichle
Hacker Engineering, Inc.
"King of Work-Arounds"
LDT & CD 2004
C3D 2004 SP1
On HP Pavilion a367c
2.80 Ghz/512MB RAM
XP PRO - SP2
"Brian Hailey" wrote in message
news:41a2583e_3@newsprd01...
Hi Don,
That may be a viable work around but as this is simply a learning project, I
would like to see if there is a fix for this or, if not, a bug logged. I
will give it a go and see what happens.
That seems to work (at least graphically). I don't know what would happen
if I create a surface from the corridor though.
--
Brian Hailey
LDT2005
C3D2005
XP Pro - SP 2
P4 2.8GHz
1.00 GB of RAM
"Don Reichle" wrote in message
news:41a25612$1_2@newsprd01...
> OK Brian, I'll have a go at it.
>
> How about starting Region 2 at station 4+15.27 and stopping Region 2 at
> station 4+73.36? You'll never miss the dirt in a tenth on each end of the
> region.
>
> This is through lessons learned with LDT. I always take an extra section
> at
> the beginning and ending stations of an intersection, plus or minus a
> tenth
> as the case may necessitate.
>
> HTH
>
> --
> Don Reichle
> Hacker Engineering, Inc.
> "King of Work-Arounds"
> LDT & CD 2004
> C3D 2004 SP1
> On HP Pavilion a367c
> 2.80 Ghz/512MB RAM
> XP PRO - SP2
>
>
> "Brian Hailey" wrote in message
> news:41a2535e_1@newsprd01...
> Hi all,
>
> I have a corridor created that does not go to the limits I selected. As
> you
> can see in the attached images, the Parameters for Baseline (1) show a
> region starting at 4+73.46 and another ending at the same station.
> However,
> in the drawing, there is no linework from the corridor at that station.
> Is
> this a problem? Or simply the corridor not displaying the design info? I
> was wanting to snap to that line to get my intersection design done but
> there is no line there.
>
> If anyone has any idea, I'm all ears.
>
> --
> Brian Hailey
> LDT2005
> C3D2005
> XP Pro - SP 2
> P4 2.8GHz
> 1.00 GB of RAM
>
>
>
>