Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am drawing a road with a ditch and i have made my ditch as a corridor. In some of the curves of the corridor my slope pattern is missing. Can someone open my attached file and see if its an easy fix to get it visible maybe?
I have no idea of what could be the cause of this.
There is something missing from the drawing, perhaps a country pack? Anyways, have you tried changing the frequency in curves? 20 meters seems a bit much, perhaps 1 meter interval just as a check if that's the problem?
I had trouble with the drawing also, the software appears to be missing a subassembly and when I tried to rebuild the corridor it disappeared completely. I edited the assembly and replaced the missing sub with a generic one then rebuilt the corridor. It worked fine, and I was able to add a new slope pattern which displays correctly for the entire length.
Steve Please use the Accept as Solution or Kudo buttons when appropriate
Hello, I now have a soloution and that was to delete my slope pattern and make a new one in which I picked the ditch bottom line first and then my top line as second featureline. No idea why it didn´t worked the other way.
