Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Corridor Daylight Not Connecting

20 REPLIES 20
Reply
Message 1 of 21
Anonymous
5070 Views, 20 Replies

Corridor Daylight Not Connecting

I have a strange problem. I have a corridor where the daylight works on
the right side without any problem, but a mirrored copy of the same
subassembly does not. On the left side each cross section of the
corridor has the daylight, but they are not being connected. I have
attached a screen shot showing what I'm talking about.

I have tried looking at the settings for the assembly, for the
subassembly, and for the corridor and can't find out why the corridor
refuses to connect just this one daylight. The surface is correct, but
the connecting of the daylight points is not happening. Anyone know why
or how to fix this?

EB
-----------------------
Win7 Pro 64-bit
Civil 3D 2011 64-bit
6GB RAM
20 REPLIES 20
Message 21 of 21

Francisco,

 

Thank you for this update.  I never set stationing for most offset alignments because they were just being used to control the corridor and were never used for labeling.   I just tested this in one of my files.  As soon as I set them to a station value that was near the baseline alignment starting station, the feature lines would begin at the same value on the offset alignment.

David Zavislan, P.E. | Wood Rodgers, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report