Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi all
Attached file is simple Intersection road. But as you can see drawing, Intersection slope line is overlapped.
Someone said define another alignment then I can do that
but I have no Idea for this
If someone solve this problem, please can help me
Thanks
Your main problem is the curb returns aren't really correct. When you look at it in 3D you will see your curbs are higher or lower around the returns. You really need to adjust your curb return elevations plus your templates around the NB curb really aren't going to blend very nicely. It see where you have a shoulder on one portion of the curb return. The assembly that you are using there is incorrect. What you did there was attach your slopes to the wrong attachment point so this is also causing you problems.
By all means give me a call or drop me an email if you need some help walking you through this.
Robert Gadbaw 800 247 1927 robertg@theppigroup.com
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")