Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I just started working with the Box Culverts and Culvert Headwalls. What I notice for me is that the culvert headwalls don't line wrt flowline, springline etc up with the box culvert. Please see the attachment. Please note I'm using the 154 x 26 x 60 inches Concrete Rectangular Box Culvert Headwall & 60 x 60 inch Concrete Box Culvert. I’m working with Civil 3D 2013 and the pipe and structure are out of the box at this point.
Thanks for reading this and any help would be appreciated
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")