AutoCAD Civil 3D General

Reply
Valued Contributor
RobR88
Posts: 64
Registered: ‎02-07-2012
Message 1 of 12 (1,075 Views)

Combining Multiple surfaces to create Final Surface - Boundary issues

1075 Views, 11 Replies
11-28-2012 01:53 PM

Hi Everyone,

 

I am creating my Final Grading surface with from 2 surfaces - a proposed road surface and a proposed grading surface.  (Note of roads within the road surface)

 

The issue is that when I paste the proposed road surface (that consists of several looped sections) over the proposed grading surface, the proposed grading surface within the looped road areas dissappears.

 

I have tried several options using boundaries for the inner looped areas on my road surface, and has altered my order of opterations for my final surface edits, and many other things also. 

 

I have attached an image for your reference.

 

Any ideas would be greatly appreciated.

 

Thanks.

 

Rob

Distinguished Mentor
castled071049
Posts: 823
Registered: ‎11-15-2005
Message 2 of 12 (1,053 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-28-2012 04:11 PM in reply to: RobR88

If the roads were created with separate corridors (and, hence, separate surfaces from them as well), you can paste each surface individually into the proposed grading surface without creating the voids. 

 

Other methods will work but are considerably more labor intensive. 

*Expert Elite*
mathewk
Posts: 2,711
Registered: ‎07-09-2003
Message 3 of 12 (1,044 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-28-2012 04:46 PM in reply to: RobR88
Have you tried pasting the road first then the grading?
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
*Expert Elite*
wfberry
Posts: 1,749
Registered: ‎09-05-2006
Message 4 of 12 (1,030 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 07:22 AM in reply to: RobR88

Just change snapz=0 to snapz=1 and try it.  You have 3D polylines for some reason, not sure.

 

Bill

 

 

*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 5 of 12 (1,026 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 07:42 AM in reply to: castled071049

The only foolproof way I can think of is to split up either the roads or the grading surface to multiple smaller surfaces, then paste together onto the finished grade.  (Paste the big one first, then the multiple small ones.)  Either way will work: split the roads up so they don't loop, or split the grading surface up so it fits inside the loops.

 

As said earlier, this is labour intensive.


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Pro
dgordon
Posts: 1,464
Registered: ‎12-14-2006
Message 6 of 12 (1,022 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 08:04 AM in reply to: RobR88

whatever grading or spot elevations or contours that where used to add to the grading surface, add them to the road surface instead and have one surface with no need for pasting.

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Valued Contributor
RobR88
Posts: 64
Registered: ‎02-07-2012
Message 7 of 12 (1,010 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 11:49 AM in reply to: RobR88

I may be missing something, but what is the "snapz" command?  My Civil doesn't seem to recognize it?

Valued Contributor
RobR88
Posts: 64
Registered: ‎02-07-2012
Message 8 of 12 (1,008 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 11:50 AM in reply to: mathewk

This didn't make any difference - I tried several orders, which all had different effects, but none of which were benificial to sovling my problem.

Valued Contributor
RobR88
Posts: 64
Registered: ‎02-07-2012
Message 9 of 12 (1,007 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 11:52 AM in reply to: castled071049

This worked the best of the solutions thus far, but didn't entire fix the problem.  Thanks.

*Expert Elite*
troma
Posts: 2,519
Registered: ‎05-21-2008
Message 10 of 12 (1,000 Views)

Re: Combining Multiple surfaces to create Final Surface - Boundary issues

11-29-2012 12:08 PM in reply to: RobR88

I think this is one for the wish list.

Ideally you should be able to add a hide boundary to your roads surface (possibly you already have one there) and then when you do the paste it should leave the original data in that hide location.  This is what you tried first of all, right?  And it doesn't work? Instead it is replacing data with no data, if I understand you correctly.

 

It should work as you wanted it to, I can't think of any reason why not.  What do others out there think?


Credit where credit is due! Give kudos or accept as solution whenever you can.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs