this really messed me up. i was trying to etransmit a bunch of civil 3d corridor model drawings and it only grabbed the data reference off the current drawing that's open. all other ones only detect the xref like normal e-transmit. it should detect civil 3d dependancies for all drawings. now i have to go around to everybody and ask a drawing name and path list. if you are going to make a new function, you should just make it properly. if you can only etransmit one drawing at a time compared to multiple, it's like the difference between heaven and hell. i thought it was going to e-transmit everything now the contractors are pissed that data references are missing. i have to make excuses that it's not my fault. : (
yeah. of course. i am not saying it's 1 dref missing. it's a bunch missing and file is not even in the zip. if you try etransmit multiple then you'll see. i am now etransmiting every single file in the folder. there is 20 corridors for just a small piece highway on highway 1. they should just get the designers in each segment to do it. much faster that way. i have to do the whole damn project etransmit.