Civil 3D Crystal ball

[Anonymous]

Hopefully this isn't a closely guarded secret, but.... does anyone know if the next version of Civil 3D will include the Lines/Curves menu from Land Desktop?

[Anonymous]

cjneper wrote:
> Hopefully this isn't a closely guarded secret, but.... does anyone
> know if the next version of Civil 3D will include the Lines/Curves
> menu from Land Desktop?

As you've likely heard before, those that say don't know and those that
know won't say. Since the next version of Civil 3D has yet to be
released, all plans are just that - PLANS. Autodesk tends to keep
plans close to their vest. IOW, yes, it's all a secret.

If you want to know the secrets, you should traverse your way to
myfeedback.autodesk.com - sign up to be a beta tester and you'll be in
on the secrets too.

--
Jason Hickey

Civil 3D 2007, SP3
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

www.civil3d.com

[AussieHans]

And all this time I thought we were all beta testers…

[T_Bernhard]

Yes, to some extent, but some are beta than others... 😉

[AussieHans]

Heh heh, good one.

[sboon]

Actually Jason is the Alpha Beta.

[Anonymous]

SBoon wrote:
> Actually Jason is the Alpha Beta.

I'm not 100% sure if that's a good thing or a bad thing 😉

--
Jason Hickey

Civil 3D 2007, SP3
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

www.civil3d.com

[Anonymous]

You have been called worst (Not by me of course) BTW that dem file is in
NAD26 zone 16, Meters if need to set a coordinate datum to it. When I used
the FDO to bring it in I needed to set a coordinate system to it. Didn't try
with the Civil Dem to surface tools.

--

Murph
The world is not FLAT so why is your GIS data?
http://mappingitout.blogspot.com/
"Jason Hickey" wrote in message
news:5434476@discussion.autodesk.com...
SBoon wrote:
> Actually Jason is the Alpha Beta.

I'm not 100% sure if that's a good thing or a bad thing 😉

--
Jason Hickey

Civil 3D 2007, SP3
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

www.civil3d.com

[Anonymous]

James Murphy wrote:
> You have been called worst (Not by me of course) BTW that dem file is in
> NAD26 zone 16, Meters if need to set a coordinate datum to it. When I used
> the FDO to bring it in I needed to set a coordinate system to it. Didn't try
> with the Civil Dem to surface tools.
>

Gotcha. Haven't played with it yet - been working on something else
today. I've got something I'd like you to take a look at whenever we
get to talk again. More to come...


--
Jason Hickey

Civil 3D 2007, SP3
Dell Precision M70
2 GIG RAM, 256 MB nVidia Quadro FX Go1400
Intel Centrino 2 gHz Processor

www.civil3d.com

[Anonymous]

>"Jason Hickey" wrote ...
> I've got something I'd like you to take a look at whenever we
>get to talk again. More to come...


As I said before, I know that Dana said they look good together but "MHO" I
don't think wearing a Super Civil Man cape with those red tights will cut it
in the office.

--

Murph
The world is not FLAT so why is your GIS data?
http://mappingitout.blogspot.com/