Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Changing e-max value introduces an “exclamation mark”,

4 REPLIES 4
Reply
Message 1 of 5
JamaL9722060
503 Views, 4 Replies

Changing e-max value introduces an “exclamation mark”,

Changing e-max value introduces an “exclamation mark”,

 

 

I wanted to select an emax of 6% but sounds that the horizontal curve is flagged by “exclamation mark” (attached). What might be the issue here?

 

 

Thank you

 

Best

 

Jamal

---------------------------
Jamal Numan
4 REPLIES 4
Message 2 of 5

Hi,

 

>> What might be the issue here?

Radius too small for that rule/that value?

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at ... blog.hollaus.at ... CDay 2024
------------------------------------------------------------------------------------
(not an Autodesk consultant)
Message 3 of 5

Many thanks Alfred for the answer,

 

It sounds that the exclamation mark keeps appearing if the values other than 4% for the emax is selected.

 

How this issue can be solved? How to choose for example a value of 6% for the emax while avoid having exclamation mark (attached)?

---------------------------
Jamal Numan
Message 4 of 5
sboon
in reply to: JamaL9722060

I believe that the warning is to tell you that the superelevation needs to be recalculated.  Try that and see if the warning disappears.

Steve
Expert Elite Alumnus
Message 5 of 5
JamaL9722060
in reply to: sboon

Thanks sboon,

 

The issue here that exclamation mark is kept appearing for all values of emax other than the 4% irrespective to the radius and speed chosen.

 

Then how to have the emax, for example, to be 6% without having the exclamation mark to appear?

---------------------------
Jamal Numan

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report