Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Change of Station Label Format

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
jecusi
923 Views, 3 Replies

Change of Station Label Format

Is there a way to change the format of alignment chainage from 1501+120 to this format 1501km120?

3 REPLIES 3
Message 2 of 4
troma
in reply to: jecusi

I don't see a way to change the abbreviation for the plus sign. But in your label, you should be able to add a Station Value with the Output set to "left of station character". Then type "km" after that field. Then add a Station Value with the Output set to "right of station character". This will form the three parts of your label.

Mark Green

Working on Civil 3D in Canada

Message 3 of 4
Jay_B
in reply to: jecusi

Troma beat me to it but here is the caption we use for Imperial and we have ours split out as he describes and use a block for the "station character" = km in your case.

 

sta.PNG

C3D 2018.1
C3D 2016 SP4

Win 7 Professional 64 Bit
Message 4 of 4
jecusi
in reply to: Jay_B

Thank you for the prompt reply guys!!!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report