AutoCAD Civil 3D General

Reply
Active Member
Posts: 9
Registered: ‎05-07-2012
Message 1 of 4 (1,825 Views)
Accepted Solution

Cannot change number of decimal places in elevation label

1825 Views, 3 Replies
05-07-2012 04:31 PM

The defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: http://forums.autodesk.com/t5/AutoCAD-Civil-3D/How-to-change-the-number-of-decimal-places-of-the-ele...

 

Which is:

 

Toolspace

->Settings

-->Drawing name

--->Edit Drawing Settings

---->Ambient Settings

----->Elevation

------>Precision -> We modify from 3 to 2 decimal places.

 

It does not modify the display settings.

 

Also:

 

Toolspace

->Settings

-->Drawing

--->Point

---->Label Styles

----->(right-click) Edit label styles

------>Layout

------->Text

-------->Contents

--------->click on the "..." (three points) button

(Open "Text Component Editor - Contents"

--------->Select Point Elevation in the driop down list.

---------->Precision: Set to 0.01

------------>Ok, Apply, etc...

 

This does not seem to work either.

 

Any suggestions appreciated.

 

Thanks,

 

Valued Contributor
Posts: 55
Registered: ‎10-28-2009
Message 2 of 4 (1,816 Views)

Re: Cannot change number of decimal places in elevation label

05-07-2012 05:30 PM in reply to: fjperez

The second method is the one that will work.  You are probably forgetting to press the arrow button that applies the changes.  After you modify the precision you have to press the arrow that "applies" that change to the text field.  See attached image.

Distinguished Mentor
Posts: 628
Registered: ‎01-20-2008
Message 3 of 4 (1,813 Views)

Re: Cannot change number of decimal places in elevation label

05-07-2012 05:34 PM in reply to: fjperez

When you make the change in the point style did you hit the arrow in the upper as shown. If you did not it does not push the setting to the style.Precision.png

C3D12-13
Win7x64 6gb
Active Member
Posts: 9
Registered: ‎05-07-2012
Message 4 of 4 (1,782 Views)

Re: Cannot change number of decimal places in elevation label

05-08-2012 07:06 AM in reply to: fjperez

This worked perfectly. Thanks!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs