I have created COGO points from my corridor, there seems to be 2 sets of points ontop of each other along the crown of the road. They are different numbers, so its not the same point twice, anyone know why it would do this?
Solved! Go to Solution.
You're probably generating points for multiple codes at centerline, such as pave1, pave 2, subgrade, etc... You can create points from the horizontal and vertical alignments that define the corridor using "Create Points- Alignment- Divide/Measure Alignment" if all you need is finish grade at centerline.
The lane subassemblies have an option to turn the crown point codes on or off. If you have this option turned on for both sides of the road then you'll get duplicate featurelines and probably duplicate points created along the crown. Check your assembly and try turning off the crown option for one side.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.