AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
bigmaz
Posts: 125
Registered: ‎09-27-2006
Message 1 of 5 (309 Views)
Accepted Solution

COGO points duplicating along crown of corridor

309 Views, 4 Replies
03-19-2012 04:50 AM

Hi guys

 

I have created COGO points from my corridor, there seems to be 2 sets of points ontop of each other along the crown of the road.  They are different numbers, so its not the same point twice, anyone know why it would do this?

 

Thanks

Martin

*Expert Elite*
AllenJessup
Posts: 5,790
Registered: ‎05-21-2003
Message 2 of 5 (304 Views)

Re: COGO points duplicating along crown of corridor

03-19-2012 05:26 AM in reply to: bigmaz

I don't know. Are they at the same elevation?

 

Allen

Active Member
chd4trichard
Posts: 6
Registered: ‎05-18-2011
Message 3 of 5 (300 Views)

Re: COGO points duplicating along crown of corridor

03-19-2012 06:28 AM in reply to: bigmaz

You're probably generating points for multiple codes at centerline, such as pave1, pave 2, subgrade, etc...  You can create points from the horizontal and vertical alignments that define the corridor using "Create Points- Alignment- Divide/Measure Alignment" if all you need is finish grade at centerline.

*Expert Elite*
sboon
Posts: 2,075
Registered: ‎11-08-2005
Message 4 of 5 (291 Views)

Re: COGO points duplicating along crown of corridor

03-19-2012 08:36 AM in reply to: bigmaz

The lane subassemblies have an option to turn the crown point codes on or off.  If you have this option turned on for both sides of the road then you'll get duplicate featurelines and probably duplicate points created along the crown.  Check your assembly and try turning off the crown option for one side.

Distinguished Contributor
bigmaz
Posts: 125
Registered: ‎09-27-2006
Message 5 of 5 (261 Views)

Re: COGO points duplicating along crown of corridor

04-19-2012 09:39 AM in reply to: sboon

Thanks SBoon, thats what the problem was, it was taking both subassemblies points :smileyhappy:  thanks so much for this.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Civil 3D Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for AutoCAD Civil 3D helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Civil 3D

Twitter

Facebook

Blogs