Is this fixed in 2015
Not sure if this is fixed in 2015.
if I select cogo points with points number 45,46,47 in that order.. It will prompt me to either (overwrite or <next>)
but neither of these options work..
So the only way to do it is to select in the reverse order and it works.. however this is very time consuming if I have 200 points!!!!!! Can it not just start the renumbering from the highest number?
full post here
http://ceethreedee.com/bugs/cogo-point-renumbering-does-not-work-unless-selected-from-individually-h...
Solved! Go to Solution.
Solved by ceethreedee.com. Go to Solution.
Solved by Civil3DReminders_com. Go to Solution.
B,
I don't quite understand exactly what you're trying to do. Will this help?:
http://forums.autodesk.com/t5/AutoCAD-Civil-3D-General/The-Holy-Grail-of-C3D-Renumbering-Points/m-p/...
Dave
Dave Stoll
Las Vegas, Nevada
I'd move the numbers to a larger range and then move them back to where you want. That way you don't get the renumber errors.
Assuming all points to be renumbered are in the same group.
1. (in the panorama) Ctrl-A, Datum inquiry, 2000.
First step about 3 seconds.
Bill
wfberry
not catching you there? how is changing the elevation of my points going to help me renumber.??
Can't find what you're looking for? Ask the community or share your knowledge.